Frequently Asked Questions
Everything to know before you start
Find answers about installation, delivery, returns and custom solutions.
On average, installing one set takes 10–15 minutes. The sets are fully assembled — you just need to remove the protective film and attach the molding to the wall or door. The process is simple and does not require special tools.
Moldings are made from high-quality pine wood — a natural, sustainable, and renewable material that brings warmth to the interior and can be painted in any shade.
Yes, moldings can be painted in any shade to match the walls, doors, or chosen interior accent. We recommend using a quality water-based paint and ensuring that the surface is clean and dry before painting.
Custom manufacturing takes up to 7 days. Delivery in Latvia is usually provided within 2–4 working days after the order is prepared. Delivery is free for orders over 150 €.
Yes, products can be returned within 14 days of receipt, provided they are unused and in their original packaging.
The mouldings are attached with a strong acrylic adhesive, so adhesive marks may remain after removal. The result depends on the surface type, paint quality and how long the mouldings have been in place. In some cases, the surface may need to be cleaned or restored.
LUKS4ALL mouldings are made from high-quality, dried and properly processed pine wood, helping minimise the risk of resin leakage. This issue has not been observed in practice, confirming the material’s suitability for interior use.
Walls do not have to be perfectly straight, but the quality of the surface affects the final result and the adhesion of the moldings.
If the surface is smooth, clean, and even, the moldings will hold securely and the result will look its best. Small imperfections or slight relief are usually not an obstacle, as the layer of adhesive can adapt to the surface and provide sufficient adhesion.
Very textured, uneven, or loose walls can reduce the contact surface, so the adhesion may be weaker.
Recommendation: the larger and smoother the contact surface, the more stable and durable the result will be.
